Working at a Part-145 organisation in business aviation: jobs on the line, in the hangar and in the shop
Behind every business jet that leaves in good order stands an approved maintenance organisation, with teams spread across the ramp, the hangar and the workshops. Here is how it is organised, and the jobs you can hold there, with or without a licence.
- A Part-145 organisation maintains aircraft and signs them back into service, within its approval.
- Line work gets the jet ready for its next departure, while the hangar handles heavy checks.
- Engines, components and cabin furniture are also worked on away from the aircraft, in shops.
- Several entry-level posts ask for a mechanical apprenticeship, with the licence coming later.
- The right to sign is granted by the organisation itself, after it has assessed each technician.
When a business jet lands with a fault reported by the crew, an approved maintenance organisation takes over and gets it fit to fly again. In Europe, people often call it by the name of its rules, Part-145. The work happens on the ramp, in the hangar or in the workshops, and several of these jobs are open to you before you hold a licence.
- A Part-145 organisation maintains aircraft and signs them back into service, within its approval.
- Line work gets the jet ready for its next departure, while the hangar handles heavy checks.
- Engines, components and cabin furniture are also worked on away from the aircraft, in shops.
- Several entry-level posts ask for a mechanical apprenticeship, with the licence coming later.
- The right to sign is granted by the organisation itself, after it has assessed each technician.
On this page
What is a Part-145 organisation?
It is a company approved by the civil aviation authority to maintain aircraft or their components under Part-145, the European rules for maintenance organisations. Its approval sets out exactly what it may do, and it is the organisation that declares the aircraft fit to fly again after its work.
The approval is written in classes, with A for aircraft, B for engines and C for components. Class D covers non-destructive testing, the checks that look for a hidden flaw without damaging the part. As for what needs doing, it is the CAMO, the office that manages the jet's airworthiness, that orders the work from the shop.
What does line maintenance involve?
On the line, you get the aircraft ready for its next departure, working close to the flight schedule. For EASA, the European Union Aviation Safety Agency, this means any maintenance carried out before flight to make sure the aircraft is fit for the flight planned.
The work is limited by design, and it covers troubleshooting, putting defects right, replacing components and scheduled checks, with their visual inspections. An organisation can also run line stations at airports other than its own base.
When a jet is stuck far from home, the rules even allow, in unforeseen cases, a one-off authorisation to sign, which the organisation must report to the authority within seven days. Teams work in shifts, and EASA asks for the shift schedule to reach technicians well in advance.
Who works in the hangar?
The hangar is home to base maintenance, meaning anything beyond line maintenance, starting with the heavy checks that take the aircraft out of service. There are more trades here, and EASA's guidance names them one by one.
- Planners organise the check and share out the tasks.
- Mechanics carry out each task to the standard set in the aircraft's maintenance data.
- Specialists handle non-destructive testing, composites or welding.
- Supervisors lead the work, alongside the technicians authorised to sign.
At the end of a base maintenance check, releasing the whole aircraft falls to a category C technician. B1 and B2 holders then act as support staff, and in that role they hold no right to sign.
What happens in the workshops?
The shops work on whatever comes off the aircraft, or whatever is about to go on it. Two adverts from a large business aviation group, for posts in Switzerland read in October 2026, give a clear picture.
In the engine shop, the technician carries out routine checks, swaps LRUs, the units designed to be changed quickly, and inspects the hot section of the engine. The role also covers troubleshooting the APU, the auxiliary unit that supplies electricity and air on the ground. The advert asks for a mechanical apprenticeship in machining, cars or motorbikes, with aviation experience simply a bonus.
In the cabin installations shop, you build or fit the interior furniture, in a team of up to ten, either in the workshop or on board. English at level B1 on the European language scale is needed, so that you can read the engineering data and manuals.
Can you start without a licence?
Yes, and the adverts show it. One of them, for a post in Austria read in October 2026, has the mechanic assisting the licensed engineer. The work covers the aircraft's mechanical, hydraulic and electrical systems, for scheduled and unscheduled maintenance alike.
The post asks for a completed mechanical or technical apprenticeship, English at B1 level or above and a car driving licence. The employer then offers to train the right person for the European maintenance licence after three years with the company. Those years also count towards the experience the Part-66 licence requires.
Top tip In adverts, the words Line, Base and Workshop tell you where the job is based. If your background is in car or motorbike mechanics or in machining, look first at engine shop posts, where one advert names exactly those apprenticeships as a starting point.
What does it take to sign a release to service?
You need the licence, but the organisation goes further: it first assesses your competence, qualifications and ability, then gives you its own authorisation to sign. You keep that right through practice, with at least six months of aircraft maintenance in any two consecutive years.
You also keep it through continuation training, which keeps your knowledge of technology, procedures and human factors up to date. Human factors is the part of the trade that looks at how attention and everyone's limits affect safety at work.
What next?
- The Part-66 licence: what each category will let you sign for, and the experience it requires.
- The CAMO: the office that orders work from the shop and keeps track of each jet's airworthiness.
- The maintenance jobs: this week's posts on the ramp, in the hangar and in the shops.
Every Monday brings new jobs and fresh articles on The Crew Talk, and we would love to see you back.
The whole job: Maintenance jobs in business aviation →
Read next
Sources (6)
- EASA, AMC and GM to Annex II (Part-145) of Regulation (EU) No 1321/2014, Issue 2, Amendment 5, Annex II to ED Decision 2022/011/R (AMC1 145.A.10, GM1 145.A.10, AMC2 145.A.20, AMC1 145.A.30, AMC1 145.A.47). easa.europa.eu, accessed 23 October 2026.
- EASA, FAQ no. 19100, “What are the training requirements for personnel within a Part-145 organisation, other than those contained in Part-66?”, updated 2 February 2021. easa.europa.eu, accessed 23 October 2026.
- Jet Aviation, advert “Technician P145”, Vienna (Austria), on gd.com, undated. gd.com, accessed 23 October 2026.
- Jet Aviation, advert “Aircraft Maintenance Technician”, Vienna (Austria), on gd.com, undated. gd.com, accessed 23 October 2026.
- Jet Aviation, advert “Workshop Technician - Engine shop”, Basel (Switzerland), on gd.com, undated. gd.com, accessed 23 October 2026.
- Jet Aviation, advert “Workshop Technician - Cabin Installations”, Basel (Switzerland), on gd.com, undated. gd.com, accessed 23 October 2026.