Skip to content
The Crew Talk
FR / EN
Private aviationCareers · Maintenance

Training for aircraft maintenance in France for business aviation: the state diplomas and the route to the licence

In France, the road to the workshops that look after business jets runs through national diplomas, then through the European maintenance licence. Here is how those steps fit together, and how each one changes the experience you will be asked for.

WRITTEN BY THE CREW TALK EDITORIAL TEAM · PUBLISHED 23 OCTOBER 2026 · · 4 MIN READ
In short
  • Three years at a vocational lycée, or as an apprentice, lead to the bac pro aéronautique.
  • One extra year of CS adds the basics required for the B1.1 licence, for turbine aeroplanes.
  • A full basic course at one approved school sharply cuts the experience you must show.
  • Passing the exams alone, without that course, earns no such reduction.
  • Adults changing career and apprentices can aim for the same diplomas, VAE included.

If you would like to work on business jets one day, the best-signposted route in France starts with a national diploma at a vocational lycée. It then carries on to the European maintenance licence. Every step rests on an official text, and each one brings you closer to the workshops that maintain these aircraft.

In short
  • Three years at a vocational lycée, or as an apprentice, lead to the bac pro aéronautique.
  • One extra year of CS adds the basics required for the B1.1 licence, for turbine aeroplanes.
  • A full basic course at one approved school sharply cuts the experience you must show.
  • Passing the exams alone, without that course, earns no such reduction.
  • Adults changing career and apprentices can aim for the same diplomas, VAE included.
On this page

Here's the good news: the route does not close once you leave school. The same diplomas can be earned as an apprentice, through adult education or by having your experience recognised, which leaves real room for a change of career.

Which diploma comes first?

The first diploma of the trade is the bac pro aéronautique, a vocational upper-secondary diploma. It takes three years from the age of about fifteen, or two years after a first year of lycée. You can study for it at school or as an apprentice, with twenty weeks of work placements that count towards the exam.

It comes with three options, avionics, systems and structure, and the systems option is the one closest to the mechanics of a jet. Its official record describes a technician who works on the aircraft's onboard energy, meaning its mechanical, electrical, hydraulic and pneumatic systems.

The course goes beyond technique, as it also covers the regulatory side of the trade. Certifying staff, approved organisations and continuing airworthiness all appear on the programme, and you will meet those words again later in job adverts.

Why add a specialisation certificate?

Because it takes you straight towards the licence. The CS aéronautique, a one-year certificat de spécialisation, follows the bac pro. According to Onisep, the French public body for careers information, its option for turbine aeroplanes matches the basic knowledge of the European B1.1 licence.

That subcategory is precisely the one for turbine aeroplanes, business jets among them, as our page on the Part-66 licence explains. The course covers the aircraft's systems, repair and maintenance procedures, and technical communication in English.

The CS recruits holders of a bac pro in aeronautics or general aviation through Parcoursup, the national admissions platform. Onisep does warn, though, that the structure option of the bac pro is less well suited to going on to this course.

Other options exist for avionics, piston aeroplanes and turbine helicopters. Among apprentices on the turbine aeroplane option, 76% were in work six months after finishing, according to InserJeunes data for 2024.

How does training shorten the experience required?

The Part-66 licence asks for two things, basic knowledge tested by modular exams and practical maintenance experience. The experience you need depends directly on how you gained that knowledge.

After a complete basic course at a single Part-147 approved school, you can apply for the licence with one or two years of experience, depending on the category. Without that full course, the standard period applies, from one to five years depending on the category, or two to three years if you are already qualified in a technical trade.

That is the case if you pass the exams on their own, without taking the course. A course split between two schools does not normally earn the reduction either, although some authorities grant it when the whole syllabus has been covered.

Top tip Before you enrol, ask the school whether it holds Part-147 approval for the complete basic course, and whether the module exams are held there. Its answer will tell you whether your training will reduce the experience you are asked for when you apply for the licence.

What is left to do after the diploma?

You still need to build experience in a maintenance shop, then apply for the licence to the civil aviation authority, the DGAC in France. Mechanic posts at a Part-145 organisation exist for exactly that, under the signature of a licensed engineer.

Next comes the type rating, which you need to sign for work on a jet. It calls for theory and practical training on the aircraft model, and the very first one adds training on the job, known as OJT.

If you train outside Europe, keep one point from EASA, the European Union Aviation Safety Agency, in mind. A licence issued outside its member states cannot be made valid as a Part-66 licence.

Can you train for it as a career changer?

Yes, and the official record for the bac pro says so in black and white. The diploma can be earned after schooling, through an apprenticeship, on a professional training contract or through adult education, and even by sitting the exam as an individual.

VAE, the French scheme that validates work experience towards a diploma, is listed too, for experience you have already gained in the trade. After the CS, a good record also opens the door to the BTS aéronautique, a two-year higher diploma, for those who want to go further.

What next?

Join us on The Crew Talk every Monday for new jobs and fresh articles, we'll be glad to see you.

The whole job: Maintenance jobs in business aviation →

Read next

Sources (5)
  1. EASA, FAQ Part-147, approved maintenance training organisations (no. 19079, experience after a basic course, updated 1 February 2021, and no. 19070, basic examinations). easa.europa.eu, accessed 23 October 2026.
  2. EASA, FAQ no. 21067, “How to get an EASA Part-66 Licence (Category B1 or B2)?”, updated 2 February 2021. easa.europa.eu, accessed 23 October 2026.
  3. France Compétences, national register of professional certifications, RNCP record 17474, Baccalauréat professionnel aéronautique option « systèmes », certifying body: French Ministry of Education. certifpro.francecompetences.fr, accessed 23 October 2026.
  4. Onisep, course record « Bac pro aéronautique option systèmes ». onisep.fr, accessed 23 October 2026.
  5. Onisep, course record « CS aéronautique option avions à moteurs à turbines » (InserJeunes 2024 data). onisep.fr, accessed 23 October 2026.

Report an error