Aviation auditor in business aviation: the job, how an audit runs and the IS-BAO and IS-BAH standards
At a business aviation operator or maintenance organisation, the auditor checks, with evidence in hand, that everyone does what the rules and manuals say. Here is how an audit runs, what the sector's own standards add and what the job adverts ask for.
- Auditing means gathering checkable evidence and weighing it fairly against the requirements.
- You never audit a department or procedure that falls within your own remit.
- Each gap found is traced back to its cause, then through to a checked fix.
- Business aviation has its own voluntary standards, IS-BAO and IS-BAH, verified by accredited auditors.
- The adverts we found look for about five years' experience and real audit practice.
An audit is never based on a hunch. The auditor turns up with a programme and asks to see flight plans, training records or contracts. They then compare what they find with the European rules and with the organisation's own manuals. At a business aviation operator or maintenance organisation, the job serves compliance first, and it is also done for the sector's own standards.
- Auditing means gathering checkable evidence and weighing it fairly against the requirements.
- You never audit a department or procedure that falls within your own remit.
- Each gap found is traced back to its cause, then through to a checked fix.
- Business aviation has its own voluntary standards, IS-BAO and IS-BAH, verified by accredited auditors.
- The adverts we found look for about five years' experience and real audit practice.
On this page
What does an aviation auditor do?
An auditor gathers evidence and assesses it objectively, to say whether the organisation meets what is expected of it. The texts of EASA, the European Union Aviation Safety Agency, define an audit as a systematic, independent and documented process. An inspection, for its part, checks conformity by observation, with measurement or testing where needed.
Auditors work for the compliance monitoring manager, who may audit in person or appoint auditors, internal or external, as long as they have the right competence. One rule holds in every case: nobody audits a function, procedure or product they are responsible for themselves.
What gets checked during an audit?
Everything the organisation does, from the flying itself to the tasks it hands to subcontractors. For a complex operator, EASA lists actual flight operations, de-icing, load control, technical standards, operating procedures, crew, dangerous goods and security, among others.
A small operator can follow a simple checklist covering flight operations, ground handling, mass and balance, training and documentation. It suggests, for instance, checking at least five flight plans. The same checklist also confirms that contracts with ground handling providers are in place and still valid.
What happens when a gap is found?
It becomes a finding, recorded on a non-compliance report that follows it through to correction. The report sets out the description, the rule concerned, the level of the finding, its root cause, the suggested correction, the person responsible and a deadline.
The compliance monitoring manager then checks the correction, and the corrective action that stops the gap coming back, before closing the report. Findings also go up to the accountable manager, so that the actions really work. Records are kept for at least five years when no other period is set.
What do IS-BAO and IS-BAH add?
They add an outside view, voluntary and built for business aviation. IBAC, the International Business Aviation Council, has published IS-BAO for operators since 2002 and IS-BAH for ground handling providers since 2014. Their audits are carried out by accredited auditors, whom the organisation chooses for itself.
IS-BAO, which suits an operator with one aircraft as well as a large fleet, is reached in three stages.
- The first confirms that the safety management system is in place.
- The second checks that risks are actually being managed.
- The third finds that safety is built into the whole business, with a lasting positive culture.
An independent audit is needed to gain registration, to move up each stage and to renew every two or three years. IS-BAH follows the same logic for FBOs, and its route to the audit is set out in our article on ground handling.
How do you become an auditor?
Through hands-on experience, then training in audit techniques, as there is no licence for this job. EASA expects the people in charge of compliance monitoring to be trained in the requirements, the manuals, audit techniques and report writing.
For IS-BAO, IBAC also looks for extensive experience in operations, safety management and auditing, followed by the workshop described on our safety and quality page. Auditors also buy the standard and its audit manual, and pay an accreditation fee. Operators, for their part, often choose them on experience, cost, distance and availability.
Top tip If you already work at an operator or a maintenance organisation, ask to join the internal audit team on an area that is not your own. The rules allow auditors who hold other roles, as long as their independence stays intact. Backed by a course in audit techniques, that experience carries real weight in an application.
What do the job adverts ask for?
Two adverts from European business aviation operators, read in October 2026, show fairly similar expectations. In Luxembourg, the auditor plans and carries out internal and external audits covering operations, maintenance and airworthiness. They also support audits by customers and the authority, and track non-conformities in dedicated software.
The post asks for more than five years in aviation, two of them in compliance monitoring or a comparable role, auditor training and fluent English. In Austria, a quality and compliance manager role asks for five years of relevant experience, at least two in aviation, a technical degree and excellent English.
That second advert shows an annual gross salary of 50,000 to 65,000 euros, negotiable with experience. It is one advert's example, not the norm for the sector.
What next?
- Safety and quality jobs: auditor and compliance posts open at the operators we follow.
- The safety manager: the neighbouring role, which runs the safety management system the auditor comes to check.
- Working in a CAMO: the airworthiness office, one of the areas an auditor reviews.
New jobs and fresh articles appear on The Crew Talk every Monday, and we would be delighted to see you back.
Read next
Sources (6)
- EASA, Easy Access Rules for Air Operations, ORO.GEN.200 Management system, AMC and GM (compliance monitoring: audit, inspection, audit programme, findings, training, record keeping). easa.europa.eu, accessed 23 October 2026.
- IBAC, IS-BAO. ibac.org, accessed 23 October 2026.
- IBAC, IS-BAO Auditors. ibac.org, accessed 23 October 2026.
- IBAC, IS-BAH, International Standard for Business Aircraft Handling, 2024 brochure. ibac.org, accessed 23 October 2026.
- Global Jet Luxembourg, “Compliance Monitoring Auditor” advert, Luxembourg, on recruitee.com, undated. globaljetluxembourg.recruitee.com, accessed 23 October 2026.
- GlobeAir, “Quality & Compliance Manager” advert, Hörsching (Austria), on globeair.com, undated. globeair.com, accessed 23 October 2026.
