Skip to content
The Crew Talk
FR / EN
Commercial aviationMaintenance

The Part-66 licence at an airline: what B1 and B2 engineers sign for, and how to get in through an apprenticeship

Before an airliner leaves again, an engineer signs to say it is fit to fly. At an airline, that signature does not fall to the same people on the line and in the hangar, and the licence alone is not enough to give it.

WRITTEN BY THE CREW TALK EDITORIAL TEAM · · 3 MIN READ
In short
  • On the line, maintenance is certified by B1 or B2 licence holders.
  • In the hangar, after base maintenance, a category C holder signs the release.
  • The licence is not enough: the maintenance organisation also issues your authorisation to sign.
  • Some airlines offer four-year apprenticeships that lead to a B1 or B2 licence.

Before each departure, an airliner may pass through the hands of an engineer who signs its release to service. At an airline, that signature rests on the Part-66 licence, the European maintenance licence, but it is not given in the same way on the line and in the hangar.

In short
  • On the line, maintenance is certified by B1 or B2 licence holders.
  • In the hangar, after base maintenance, a category C holder signs the release.
  • The licence is not enough: the maintenance organisation also issues your authorisation to sign.
  • Some airlines offer four-year apprenticeships that lead to a B1 or B2 licence.
On this page

The European rules draw a clear distinction between line maintenance and base maintenance, and each has its own signatories. Understanding the difference helps you read an airline advert and see which licence it expects.

What do you sign for in line maintenance?

For EASA, the European Union Aviation Safety Agency, line maintenance means any maintenance carried out before flight to make sure the aircraft is fit for the intended flight. It can include troubleshooting, defect rectification, component replacement with external test equipment, and scheduled checks including visual inspections.

That work is certified with a B1 licence, which covers the structure, the engines and the mechanical and electrical systems, or with a B2 licence, which covers avionics and electrical systems. On a turbine airliner, the B1 you need is B1.1, the subcategory for turbine aeroplanes.

Category A, narrower in scope, lets you certify minor scheduled line maintenance and the rectification of simple defects.

And in the hangar, in base maintenance?

Anything that is not line maintenance counts as base maintenance, starting with the major checks carried out in the hangar. There, the aircraft's release to service is signed by a category C holder.

B1 and B2 holders work alongside as support staff, meeting the same requirements as for certifying: licence, type rating, recent experience and continuation training. In that role, however, they hold no certification privileges. An organisation may also bring in engineers who already hold line certification privileges to work as support staff in the hangar.

Why is the licence not enough to sign?

Holding a Part-66 licence with the right type rating does not, on its own, make you qualified to sign, as EASA points out. It is the approved maintenance organisation that assesses each engineer's competence and then issues their authorisation to certify.

On an airliner, the licence must also carry the aircraft's type rating. That takes type training, in theory and in practice, followed for the very first rating by on-the-job training, known as OJT.

For aeroplanes with a maximum take-off mass of 30 tonnes or more, EASA recommends that the practical part last at least two weeks. It is only a guide, EASA adds, as the length matters less than the content, which should cover a representative range of tasks.

How do you get into maintenance through an airline?

Some airlines train their future engineers themselves through apprenticeships. A European regional airline offers a four-year apprenticeship, paid throughout, that leads to a Part-66 B1 or B2 licence.

It is open from the age of 18 to school leavers with a qualification that includes maths or physics. Training combines work at the airline's maintenance facilities with technical courses at a college and at an approved Part-147 school.

Another European airline advertised a similar four-year programme starting in September 2026, open to school leavers. After a spell in the classroom, apprentices join its line maintenance facilities and work on its fleet.

Going through an approved school also shortens the experience you need. After a full basic course at a single approved school, you can apply for the licence with one or two years of maintenance experience, depending on the category. Without that course, expect one to five years, depending on the category and your background.

Top tip Before you apply, check whether the advert is for line or base maintenance. A line post calls for a B1 or B2 licence with the fleet's type, while a hangar post may also look for category C holders to sign after major checks.

What next?

We publish fresh articles every Monday, so do come back and see us on The Crew Talk.

Read next

Sources (6)
  1. EASA, AMC and GM to Annex II (Part-145) of Regulation (EU) No 1321/2014, Issue 2, Amendment 5, Annex II to ED Decision 2022/011/R. easa.europa.eu, accessed 22 October 2026.
  2. EASA, FAQ Part-66, What are the Part-66 licence categories?. easa.europa.eu, accessed 22 October 2026.
  3. EASA, FAQ No 21067, How to get an EASA Part-66 Licence (Category B1 or B2)?, updated 2 February 2021. easa.europa.eu, accessed 22 October 2026.
  4. EASA, FAQ Part-147, approved training organisations (experience required, length of practical type training). easa.europa.eu, accessed 22 October 2026.
  5. Emerald Airlines, Aircraft Engineering & Maintenance Apprenticeship 2026, posted 11 February 2026. emeraldairlines.com, accessed 22 October 2026.
  6. Ryanair, Aircraft Maintenance and Engineering Apprenticeship, Dublin 2026. careers.ryanair.com, accessed 22 October 2026.

Report an error